Window filter blue 160 x 95 mm

Sini window filter 160 x 95 mm The polyester fiber filter fabric of the ventilation window is intended for filtering pollen and impurities from the outside air from the incoming air. The air permeability of the fiber filter is sufficient for good ventilation in a house equipped with both gravity and mechanical ventilation. The filter also makes cleaning easier, because most of the dust in the apartment comes through ventilation. In addition to impurities, the filter fabric acts as a mosquito net and keeps flying insects out. A separate insect net for the ventilation window is then not needed. Lets most of the light through but is not transparent. The non-woven filter stays dry and mold or fungus does not form in the filter. The package contains a filter cloth and about 15 meters of fixing tape. In addition to Sini product online store, the window filter is sold in well-stocked stores. The window filter is usually found on the same shelf as the vacuum cleaner's dust bags. Instructions for use Open the window and measure the size of the window opening. Cut a piece of the filter fabric about 2 cm larger than the opening. Attach the tape to the edges of the cut piece so that it reaches the window frames on all its edges. Wipe the window frame from dirt and loose debris with a microfiber cloth. The frame must be dry and clean so that the tape attachment holds securely. The temperature of the frame must be at least +10 degrees, if necessary, it can be heated with a hair dryer, for example. Remove the protective strip from the tape and attach the filter to the edges of the window opening from the bottom up. The filter fabric must not be pulled tight to the window opening, but should be left bag-like so that the air flowing through does not tear the filter from its place. If necessary, the filter fabric can also be joined with tape.